Showing all 6 results

  • PLC Splitter

    PLC Splitter

    Steel tube PLC splitter, 0.9mm, 1 meter, without connector

    Output Ratios: 1×2, 1×4, 1×8, 1×16

    PLC splitter is based on semiconductor technology. As its name shows, PLC splitters are manufactured by planar waveguide circuit technology. PLC splitter design consists of one optical PLC chip and several optical arrays depending on the output ratio. The optical arrays are coupled on both ends of the PLC splitter chip.

    Item IL(dB) PDL(dB) RL(dB)
    Wavelength(nm) 1310 1550 1310 1550 1310 1550
    Spec. MAX. 3.8 MAX 0.3 ≥60
    Port1 3.67 3.65 0.08 0.06 Pass Pass
    Port2 3.60 3.78 0.06 0.05 Pass Pass
    Input N/A Pass Pass
    MAX. 3.67 3.78 0.08 0.06 N/A
    MIN. 3.60 3.65 0.06 0.05 N/A
    Average 3.63 3.72 0.07 0.06 N/A
    Uniformity(≤0.5dB) 0.08 0.14 Directivity(dB) ≥55
    SKU: ORS-M-1E-850 Category:
    Read more
  • Steel Tube Coupler

    Steel Tube Coupler

    Steel Tube Coupler, triple window, 1×2, 0.9mm, 1 meter, without connector

    Wavelength(nm) 1310/1490/1550 Check
    Excess Loss(dB) ≤0.15
    NO. Blue Yellow
    Ratio(%) 50.00 50
    Insertion Loss(dB) ≤3.50 ≤3.50
    SKU: ORS-M-1E-850 Category:
    Read more
  • PLC Splitter Cassette

    PLC Splitter Cassette

    PLC splitter cassette type, SC/APC connector
    Output Ratios: 1×2, 1×4, 1×8, 1×16

    Catvision provides a high precise cassette type PLC splitter for the construction of optical network. Low requirements of placing position and environment, compact cassette type design, can easily be placed into optical fiber distribution box, optical fiber junction box or any kind of box, which can reserve some space.

    Parameters 1×2 1×4 1×8 1×16 1×32
    Operating Wavelength (nm) 1260~1650
    Insertion Loss (dB) ≤4.0 ≤7.3 ≤10.5 ≤13.7 ≤17.0
    Loss Uniformity (dB) ≤0.4 ≤0.6 ≤0.8 ≤1.2 ≤1.5
    Polarization Dependent Loss (dB) ≤0.2 ≤0.2 ≤0.2 ≤0.3 ≤0.3
    Return Loss (dB) ≥55 ≥55 ≥55 ≥55 ≥55
    Directivity (dB) ≥55 ≥55 ≥55 ≥55 ≥55
    Wavelength Dependent Loss (dB) ≤0.3 ≤0.3 ≤0.3 ≤0.5 ≤0.5
    Operating Temperature (℃) -40~85
    Storage Temperature (℃) -40~85
    SKU: IN2-M Series,IN2-G,IN4-M,2IN-2M Category:
    Read more
  • Patch Cord

    Patch Cord

    Patch cord single mode, 3.0 mm

    Connector: SC-UPC/LC-UPC/SC-APC

    Length: 3 Mtr, 5 Mtr

    A fiber-optic patch cord is a fiber-optic cable capped at either end with connectors that allow it to be rapidly and conveniently connected to CATV, an optical switch or other telecommunication equipment. Its thick layer of protection is used to connect the optical transmitter, receiver, and the terminal box.

    Connector Type SC-UPC/LC-UPC/SC-APC
    Optical Fiber Corning single-mode
    Cable Type PVC  &  LSZH on request, 0.9mm/2.0mm/3.0mm Simplex & duplex
    Cable Color, Length Yellow, 1m , 2m & 3m .Other lengths on request
    Optical Specification
    Typical ≤0.2dB, Max. 0.3dB
    MTRJ Max. 0.5dB
    Return Loss >PC≥45dB, UPC≥50 dB, APC≥60dB
    Mechanical Specification
    Connector Ferrule Ceramic, (MTRJ: PS- Polyphenylene Sulphide )
    Apex Offset <50um
    Fiber Height ±100nm


    SKU: IN2-M and IN2-E Series Category:
    Read more
  • Optic Adaptor

    Optic Adaptor

    Connector: SC-UPC/SC-APC

    A fiber optic adapter or coupler is a special connector designed to mate or connect two ends of a fiber optic cable with high precision. The adapter uses a simple design: the ends of two separate fiber optic cables with fiber optic connectors fit into two slots opposite each other.

    Connector Types SC-SC Fiber Mode Single mode
    Fiber Count Simplex Adapter Color Blue
    Insertion Loss ≤0.2dB Return Loss >50dB
    Exchangeability ≤0.2dB Repeatability ≤0.2dB
    Durability >1000 times Flammability Rate UL94-V0
    Working Temperature -40~75°C Storage Temperature -40~85°C
    SKU: IN2-M and IN2-E Category:
    Read more
  • Optic Node (FTTH)

    Optic Node (FTTH)

    Output Options: 1 Output/ 2 Output/ 3 Output/ 4 Output

    Catvision Introducing mini FTTH (Passive) Node. Which is specially design for Fiber to the Home Fiber to the Post Fiber to  the Building as per Indian Operating Condition. This FTTH gives you 72 dB RF output @ 0 dBm Optical Input.  It has the capability to convert even weak optic signals to a high quality RF signal. it’s small size It can be fixed even in the Joint Closure box also.


    • Frequency 40 ~ 1000 MHz
    • Designed for FTTH FTTP FTTB FTTX No Power required
    • Maximum Out Put Level 72 dBu 0 dBm input
    • Realize the analog or digital signal access to the home
    • Specially designed for All type of digital Set Top Box
    Output 1, 2, 3, 4 Output
    Connector Types SC/APC
    Output Level 72dBμ
    Input Level 0 dBm
    Frequency 40 ~ 1000 MHz
    Net Weight 0.15 Kg
    Dimensions 4 x 2 x 2.5 cm



    SKU: IN1-E-800 (Passive) Category:
    Read more

Product Enquiry