To assure network stability an operator must measure and monitor key parameters at each stage of the network – IF, Optical, RF and Digital. Catvision’s range of meters fulfils this requirement.
Showing all 5 results
-
DVB-C Meter DSM-802
Read moreDVB-C Meter DSM-802
- DVB-C Meter with advanced technology High
- accuracy digital signal measurement
- Frequency range 47 ~ 860MHz
- Color LCD display with backlight
- Full band spectrum analyzer
- Auto detection of symbol rate & QAM mode
- Measurement of MER & PreBER
- Facility to edit and save channel number, frequency & bandwidth
- Three channels’ level & tilt measurement
- Facility to feed 9 network channel plans
- Facility to store measured signal levels of multiple locations Software upgrade by USB port
- Trunk line voltage measurement Rechargeable 7.4V/1000mAH Li battery
- Battery charging indication
- PC tools for channels editing
- Auto standby
-
DVB-C + Power Meter DFM-902
Read moreDVB-C + Power Meter DFM-902
Features:
- DVB-C + Optic Power Meter
- Highly accurate digital & optic power measurement
- Optic wavelength 860 ~1610nm, selectable Frequency
- range 47 ~ 860MHz
- Color LCD display with backlight
- Full band spectrum analyzer
- Auto detection of symbol rate & QAM mode
- Measurement of MER & PreBER
- Facility to edit and save channel number, frequency & bandwidth
- Three channels’ level & tilt measurement
- Facility to feed 9 network channel plans
- Facility to store measured signal levels of multiple locations
- Software upgrade by USB port
- Trunk line voltage measurement
- Rechargeable 7.4V/1000mAH Li battery
- Battery charging indication
- PC tools for channels editing
- Auto standby
-
OTDR Model RM-1164M
Read moreOTDR Model RM-1164M
- Dual Wavelength OTDR
- Compact and convenient to carry
- Shock-proof and Fall-proof rubber protection sleeve
- Dust-protection cover to protect optic connectors
- Display: 3.5 inch Color LCD
- iLOM Event Map for Intelligent Link Analysis
- Automatic test with one click
- Auto saving of files
- Batch export of USB data files
- Automatic analysis of test results
- Remote upgrade
- Data Interface: Micro USB
- External storage: TF Card
- Power Supply: Polymer Li-Battery:3.7V, 4000mAh
- Adapter: 5VDC, 2A
- Battery Life: Standby >20h; Measuring time: >12h
- Operating Temperature: -10ºC ~ +50ºC
- Storage Temperature: -40ºC ~ +70ºC Relative
- Humidity: 0~95%
- Non-Condensing Size: 173mm x 82mm x 37mm
- Weight: ≤350g
-
Optic Power Meter Model OPM-5026
Read moreOptic Power Meter Model OPM-5026
- Optic Power Meter
- Power Meter Range: -50 ~ +26dBm
- Wavelength Range: 800nm ~1700nm
- Wavelength Selectable – 850/980/1300/1310/1490/1550/1625/1650nm Optic
- Power Detector type: InGaAs
- Universal Optic Input Connector, supporting FC/SC/ST
- Simultaneous display in linear (mW) and logarithmic (dBm)
- Display Resolution – linear: 0.1% and logarithmic: 0.01dBm
- Supports user calibration
- Automatic shutdown to save battery power
- Recover factory settings
- LCD display with back light and torch feature
- Requires AAA type batteries – 2 nos
- Memory feature to see previous measurements
-
Optic Power Meter Model OPM-5026L
Read moreOptic Power Meter Model OPM-5026L
- Optic Power Meter with Laser out feature for Visual Fault Locator
- Power Meter Range: -50 ~ +26dBm
- Wavelength Range: 800nm ~1700nm
- Wavelength Selectable – 850/980/1300/1310/1490/1550/1625/1650nm Optic
- Power Detector type: InGaAs
- Universal Optic Input Connector, supporting FC/SC/ST
- Simultaneous display in linear (mW) and logarithmic (dBm)
- Display Resolution – linear: 0.1% and logarithmic: 0.01dBm
- Supports user calibration
- Automatic shutdown to save battery power
- Recover factory settings
- LCD display with back light and torch feature
- Requires AAA type batteries – 2 nos
- Memory feature to see previous measurements
